Thermodent furnaces Т-04, Т-05











T-04

Vertical traverse of working table

T-05

Vertical traverse Of heating chamber

THERMODENT

Automated vacuum furnaces for sintering metal-ceramic, zirconium and press-ceramic crowns.
High reliability (with 2 years warranty), heating element KANTHAL (Sweden) covered by quartz tube, compactness and simplicity of servicing provide high firing quality while working with various ceramic masses.

Features

150 archival factory programs for following ceramic masses
GC Initial Noritake EX3 IVOCLAR IPS
Creation Celtra Duceram KISS
Ceramko 3 HeraCeran VITA
FINESSE ZEO CE LIGHT IPS e.max ceram

Protection from power supply failures. Short failures don’t corrupt firing cycle and vacuum .

High measurement accuracy of temperature of ±1°С in wide supply voltage range (187 to 244 V AC) due to selfcalibration eliminate the need of periodical calibration by silver.

Nonvolatile memory

Vacuum system with electronic sensor provides:
  • vacuum level control
  • reaching a vacuum level of 90% at a given temperature
  • automatic breaking of program on lose of vacuum in firing chamber
  • loss of mains voltage does not lead to loss of vacuum

Ability to view and change parameters during the program

Wide functional possibilities due to independent programming of 14 parameters

Night mode

Fast copying of both user and archival programs


Main technical data
Characteristic Т-04 T-05
Temperature range,°С 30 - 1150 30 - 1150
Heating rate, °С/min.. 2 - 230 2 - 230
Diametr of working camera, mm 100 100
Furnace height, mm 440 280
Агктфсу depth, mm 300 400
Furnace width, mm 306 275
Max mass, kg 15 15
Power supply, V; Hz 220, 50 220, 50
Power consumption without vacuum pump (max), W 1100 1100

Programmed parameters
Parameter Range Unit
Drying time 1-st stage (firing table at lower position) 0 - 3600 Sec
Drying time 2-st stage (closing time of firing chamber) 10 - 900 Sec
Drying time 2-st stage(drying time - pre-sintering) 0 - 3600 Sec
Drying temperature (starting)) 200 - 800 °С
Heating rate 2 - 230 °С/min.
Firing(High) temperature 300 - 1150 °С
Firing (holding at high temperature) time 0 - 3600 Sec
Cooling rate 30 - 230 °С/min.
Opening temperature 300 - 1150 °С
Opening time 10 - 900 Sec
Температура включення вакуумної помпи 200 - 1150 °С
Temperature of switching ON of vacuum pump 200 - 1150 °С
Firing time under vacuum 0 - 600 Sec
Vacuum level 0, 90 -108, FULL Relative units, (100=60 mm Hg)